1 /
2
200μL低吸附濾芯吸頭（盒裝 無菌無酶）T-200L-C-F
商品簡述：
The Servicebio upgraded low retention pipette tips are internally and externally well-designed tips.
The self-developed low retention material can ensure low retention on the inner wall,the brand new tip design can ensure no liquid hanging on the outer wall.
Low retention pipette tips can reduce sample residue and improve pipetting accuracy in liquid transfer,ensuring experimental accuracy and saving valuable reagent
(Note: Low retention pipette tips are particularly important in protein and nucleic acid research applications!)
Main Parameters
Tip material: PP
Filter material: PE
Tip length:50.5 mm
Treatment: low retention treatment
Sterilization: Radiation
Compatibility: Servicebio,Eppendorf, Thermo, Brand, Gilson, Rainin, D-lab etc.
Certificate: CE, FDA, UKCA, etc.
Other information: Sterilize, DNase & RNase free, Pyrogen free (endotoxin free)
Batch No: See outside carton packing
Storage and Transportation
Sealed store and transport at room temperature, valid for 36 months.
Instructions
When using a single channel pipette, insert the end of the pipette vertically into the tip, and then tighten the pipette by turning it slightly from side to side
Note
1. This product is compatible with multi-channel pipettes.
2. Medical Device Production License (the relevant statement can be downloaded from the product page) is not necessary for this product.
3. Ware lab coat and disposable gloves during operation.
4. Servicebio self-developed low retention material will become brittle, fog and other phenomenon may occur after high temperature and high pressure (121℃/30min) sterilization; Meanwhile, the low retention performance may be weakened, which is a unique feature of this low retention material and has no effect on the conventional use.
主要用於微量試劑的轉移，例如：
• PCR實驗，試劑配置及加樣;
• WB實驗，試劑加樣;
• 免疫組化，抗體加樣;
• 核酸提取，應用於全自動或者半
自動移液工作站。
微量吸頭-普通材質
特點：
1.採用進口高透明聚丙烯原料（PP）生產，表面光滑，無彎曲;
2.全過程潔凈車間生產，無污染;從10ul到10ml吸頭，規格齊全;
3.可與Servicebio、Thermo、大龍、Eppendorf、Gilson等市面上多種品牌移液器相容;
4.耐受溫度-80°C-121°C，耐輻照。
低吸附材質
1.降低樣品殘留，提高移液精度，確保實驗準確性，節約珍貴試劑
第二代低吸附
自研低吸附材料，內壁低殘留
全新吸頭設計，外壁不掛液
内外兼修，才是好吸頭
加長
三款加長吸頭：
10ul吸頭長度為31.8mm，10加長吸頭長度為44.7毫米;
200ul吸頭長度為50.5mm，200加長吸頭長度為100毫米;
1000ul吸頭長度為78mm，1000ul加長吸頭長度為100.15mm。
優勢：
避免吸頭過短，移液器插入過深，造成試劑間交叉污染，引起實驗結果不準導致實驗失敗。
注：濾芯吸頭不能高溫高壓，濾芯會掉出。
Servicebio濾心吸頭都可做袋装，但是性價比而言更推薦盒裝濾芯吸頭：
1、使用更方便，不用拆袋裝盒;
2、大包裝的濾芯吸頭拆袋后更容易污染;
3、袋裝濾芯和盒裝濾芯價格差異不大。
單支裝濾芯吸頭
• 配合servicebio 5mL、10mL移液器，可精確移液。
• 替代移液管+電動移液器。
吸頭升級
升級優勢：
1、10ul加長吸頭升級后，取消了刻度設計，避免液體掛壁，減少珍貴試劑殘留;
2、200ul、1000ul加長吸頭取消刻度設計，彎曲情況明細改善，200ul吸頭口部改為喇叭口，更貼合移液器不掉槍;
吸頭包裝升級：
1、一次性使用吸头，即用即撕，方便快捷；
2、獨立設計吸頭盒，放置即用，可重複使用，不用買袋裝單獨手工裝盒;
3、吸頭盒可高溫高壓使用;
4、較盒裝吸頭成本更低，完成了從袋裝到盒裝的過渡，性價比更高。
產品庫存：0
